Build Your Own Clone Message Board

It is currently Thu Mar 28, 2024 10:54 pm

All times are UTC - 6 hours




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Crown Jewel Settings
PostPosted: Mon Apr 24, 2017 12:38 pm 
Offline
User avatar

Joined: Wed Oct 25, 2006 8:03 pm
Posts: 132
Just finished building the Crown Jewel last night… my first build in a long while. Made me realize how bad my eyesight has gotten (really small resistors and cap markings!) I spent the most time getting those pots and switches to stay in place before soldering to the board. I think it took about an hour but once I figured out what I needed to do, it was smooth sailing.

I was wondering if anyone has the settings written down to get all the tones Keith got in his video comparing the CJ to various pedals?

_________________
Take a break from Building Pedals and
Read our webcomic ~ nemu*nemu at:
http://nemu-nemu.com /


Top
 Profile  
 
 Post subject: Re: Crown Jewel Settings
PostPosted: Mon Apr 24, 2017 2:41 pm 
Offline
Moderator
User avatar

Joined: Tue Jan 02, 2007 1:24 pm
Posts: 16196
Location: Albany, NY
Interesting question! I haven't seen anything, but let me ask Keith....

_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)

My Website * My Musical Gear * My DIY Pedals: Pg.1 - Pg.2


Top
 Profile  
 
 Post subject: Re: Crown Jewel Settings
PostPosted: Mon Apr 24, 2017 3:38 pm 
Offline
Site Admin
User avatar

Joined: Sun Jan 22, 2006 1:39 pm
Posts: 5984
Location: Richland, WA
I didn't write them down, but you should be able to see the settings in the video. There should be a brief close up of each.

_________________
*patience is a virtue*

Please do not PM me. email is prefered. keith@buildyourownclone.com


Top
 Profile  
 
 Post subject: Re: Crown Jewel Settings
PostPosted: Mon Apr 24, 2017 3:39 pm 
Offline
Site Admin
User avatar

Joined: Sun Jan 22, 2006 1:39 pm
Posts: 5984
Location: Richland, WA
FYI, it is an HD video. If your player doesn't default to HD, you'll need to change the settings.

_________________
*patience is a virtue*

Please do not PM me. email is prefered. keith@buildyourownclone.com


Top
 Profile  
 
 Post subject: Re: Crown Jewel Settings
PostPosted: Mon Apr 24, 2017 11:56 pm 
Offline
User avatar

Joined: Wed Oct 25, 2006 8:03 pm
Posts: 132
Thanks!

I jotted down the settings as best I could from re-watching the video. Some may be incorrect as I just took notes as I watched the video.

The switch setting names come from the instruction sheet.
Mid Q: Left is 'normal', middle is 'narrow', right is 'wide'.
SOFT and HARD: Middle setting is NONE.

Klon Level Up

Freq Q: 2 o’clock
Presence: 7 o’clock
Drive: 7 o’clock
Level: 4 o’clock
Treble: 4 o’clock
Mids: 12:30 o’clock
Bass: 12:30 o’clock
18v/9v: 18v
Mid Q: Wide
LED/Soft/Si: NONE
Si/Hard/Ge: NONE

Klon Gain Up

Freq Q: 2 o’clock
Presence: 12 o’clock
Drive: 12 o’clock
Level: 2 o’clock
Treble: 10 o’clock
Mids: 3 o’clock
Bass: 11 o’clock
18v/9v: 18v
Mid Q: Wide
LED/Soft/Si: NONE
Si/Hard/Ge: Germanium

Boss HM-2

Freq Q: 9 o’clock
Presence: 11:30 o’clock
Drive: 5 o’clock
Level: 4 o’clock
Treble: 2 o’clock
Mids: 10 o’clock
Bass: 2:30 o’clock
18v/9v: 9v
Mid Q: Normal
LED/Soft/Si: Silicon
Si/Hard/Ge: Germanium

Ibanez TS-808

Freq Q: 2 o’clock
Presence: 12 o’clock
Drive: 2 o’clock
Level: 11:30 o’clock
Treble: 11 o’clock
Mids: 2 o’clock
Bass: 11 o’clock
18v/9v: 9v
Mid Q: Normal
LED/Soft/Si: Silicon
Si/Hard/Ge: NONE

Fulltone OCD

Freq Q: 1 o’clock
Presence: 1 o’clock
Drive: 3 o’clock
Level: 11 o’clock
Treble: 9 o’clock
Mids: 1 o’clock
Bass: 2 o’clock
18v/9v: 9v
Mid Q: Normal
LED/Soft/Si: NONE
Si/Hard/Ge: Silicon


Boss DS-1

Freq Q: 2 o’clock
Presence: 2 o’clock
Drive: 2 o’clock
Level: 11 o’clock
Treble: 1 o’clock
Mids: 10 o’clock
Bass: 10 o’clock
18v/9v: 9v
Mid Q: Narrow
LED/Soft/Si: NONE
Si/Hard/Ge: Silicon

Zendrive 1

Freq Q: 2 o’clock
Presence: 11 o’clock
Drive: 3 o’clock
Level: 11 o’clock
Treble: 1 o’clock
Mids: 1 o’clock
Bass: 11 o’clock
18v/9v: 9v
Mid Q: Normal
LED/Soft/Si: Silicon
Si/Hard/Ge: NONE

Zendrive 2
(Presence works similar to voice on ZD)

Freq Q: 2 o’clock
Presence: 11 o’clock
Drive: 3 o’clock
Level: 11 o’clock
Treble: 1 o’clock
Mids: 1 o’clock
Bass: 11 o’clock
18v/9v: 9v
Mid Q: Normal
LED/Soft/Si: Silicon
Si/Hard/Ge: NONE

DOD 250

Freq Q: 2 o’clock
Presence: 5 o’clock
Drive: 5 o’clock
Level: 10 o’clock
Treble: 3 o’clock
Mids: 11 o’clock
Bass: 12:30 o’clock
18v/9v: 9v
Mid Q: Narrow
LED/Soft/Si: NONE
Si/Hard/Ge: Silicon

Marshall Blues Breaker

Freq Q: 12 o’clock
Presence: 10 o’clock
Drive: 2 o’clock
Level: 11 o’clock
Treble: 12 o’clock
Mids: 12 o’clock
Bass: 9 o’clock
18v/9v: 9v
Mid Q: Normal
LED/Soft/Si: Silicon
Si/Hard/Ge: NONE

Timmy (Setting 1)

Freq Q: 11 o’clock
Presence: 10 o’clock
Drive: 3 o’clock
Level: 11 o’clock
Treble: 9 o’clock
Mids: 12 o’clock
Bass: 12:30 o’clock
18v/9v: 9v
Mid Q: Normal
LED/Soft/Si: Silicon
Si/Hard/Ge: NONE

Timmy (Setting 2)

Freq Q: 11 o’clock
Presence: 10 o’clock
Drive: 4 o’clock
Level: 10 o’clock
Treble: 9 o’clock
Mids: 12 o’clock
Bass: 12:30 o’clock
18v/9v: 9v
Mid Q: Normal
LED/Soft/Si: LED
Si/Hard/Ge: NONE

Vintage Rat

Freq Q: 2 o’clock
Presence: 5 o’clock
Drive: 5 o’clock
Level: 9 o’clock
Treble: 10 o’clock
Mids: 2 o’clock
Bass: 3 o’clock
18v/9v: 9v
Mid Q: Normal
LED/Soft/Si: NONE
Si/Hard/Ge: Silicon

_________________
Take a break from Building Pedals and
Read our webcomic ~ nemu*nemu at:
http://nemu-nemu.com /


Top
 Profile  
 
 Post subject: Re: Crown Jewel Settings
PostPosted: Tue Apr 25, 2017 1:08 pm 
Offline
Moderator

Joined: Thu Nov 15, 2007 10:57 pm
Posts: 3546
Location: San Diego
Nice! Thanks for doing this :)


Top
 Profile  
 
 Post subject: Re: Crown Jewel Settings
PostPosted: Tue Apr 25, 2017 1:16 pm 
Offline
User avatar

Joined: Wed Oct 25, 2006 8:03 pm
Posts: 132
Welcome! :lol:

_________________
Take a break from Building Pedals and
Read our webcomic ~ nemu*nemu at:
http://nemu-nemu.com /


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group