Build Your Own Clone Message Board

Considering the Classic Fuzz kit. Can I use BC108 or 109's in this instead of the transistors it comes with?

Thanks.

Sure, as long as they're NPN and the gain isn't really low. there should be no problem. Make sure to check the pinout so that you get the legs in the right holes.

_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)

My Website * My Musical Gear * My DIY Pedals: Pg.1 - Pg.2

I recommend you get some SIL (single in line) sockets so you can test different types of transistors without committing to them. Unsoldering anything with more than two leads is no fun! BYOC is out of stock at the moment, but you can probably get them on Amazon or eBay.

_________________
Scott

My band, Austin Hollow

Here are some:

https://www.mammothelectronics.com/coll ... /620-sip36

Definitely a handy item to keep on hand for pedal building/DIY electronics.

_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)

My Website * My Musical Gear * My DIY Pedals: Pg.1 - Pg.2

Very useful guys. Thank you. You've made my decision to get the kit. Make sure you get your commission