Build Your Own Clone Message Board

Is the boost pre or post gain on the Silver Pony 2? If post, any possibility to move it to pre gain?

It's post.

Yes, you could move it to pre. Eyelet 4 on the PCB on the "drive side" connects to the input jack. Eyelet 8 on the boost side connects to the output jack. Eyelets 5 are the sends to their respective circuit and eyelets 7 are the returns from their respective circuit.

_________________
*patience is a virtue*

Please do not PM me. email is prefered. keith@buildyourownclone.com

Here's a 'link' to a couple of ways of accomplishing that...
viewtopic.php?f=50&t=17245

Sorry, you'll have to copy and paste as I don't know how to embed that link.

_________________
“To know, and not to do, is not to know”

Thanks both for the responses. This makes the SP2 very tempting. I just put together a 27v boost to slam into my Tumnus Deluxe and it sounds glorious. Started eyeing up the SP2 after having such a good experience building the 27v and the Large Beaver.

I built a Silver Pony II a couple of years ago. I installed a 3rd 3PDT foot switch to be able to change the order. It is a great mod for an already great pedal!
Here is the thread...
viewtopic.php?t=59570

_________________
“To know, and not to do, is not to know”