Build Your Own Clone Message Board

First post from a pedal newb here.
Have built 12+ telecaster types and 3 tube amps, though, so not a newb to the soldering iron.
Started with the simple Mimosa Jr compressor, just to get a feel for pedal work.
Lotta fun, and worked right off the bat.
Will definitely be getting more BYOC pedal kits !

One minor note on the Mimosa Jr instruction pdf.
In Step 3 of Enclosure Assembly, mounting the jacks, I think the text has it backwards with respect to which jack has its sleeve terminal facing which way. The pictures were right though, so all good.

cheers
/mm

I would add that, after browsing thru this forum a little, I ran across the tip about wiring the hardware (pots, jacks, etc) BEFORE you install them in that tiny 1090NS box.
I was wondering about that as I was melting insulation trying to get the pots wired up.
It was reminiscent of doing hook-ups in a Fender Champ chassis.
I pressed on, thinking surely there was a reason to install them first that would appear to me - a first timer - in the end. Nope.
So I would say to my fellow pedal newbs working in the small 1090NS enclosure, do yourself a favor and wire at least the pots before installing them in the box.
The AC adapter and the jacks weren't that bad.
Seems like a mention of this in the instructions PDF wouldn't be a bad thing.

_________________
I make all my own mistakes.