sjaustin wrote:
That being said: my guess is that your problem is with the stereo jack. You need to ground the RING eyelet on the PCB since there is no ring tab on your jack. Do this by connecting it to the sleeve of one of the jacks. And the DC jack still has to be wired as shown in the instructions even though you don't plan to use a battery.
^ This. The power grounds through that ring connection, so if you don't have that connected to a grounded point, no juice flows through the circuit.
Photos are still a real good idea!
_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)
My Website *
My Musical Gear * My DIY Pedals:
Pg.1 -
Pg.2