byoc wrote:
Ah. I see. You want to be able to turn the boost on and off, but you don't want the boost channel to be independent of the drive channel.
The pre/post switch complicates things so that this cannot be done physically, i.e., there's no way you could modify the pedal. Unless you know how to program microcontrollers. This mod can be done, but the code in the microcontroller needs to be changed.
I actually think this mod is worthwhile and I would write the code for it. I'd make it so that upon power up, it defaults to "independent mode". But if you hold down both footswitches upon power up, it would go into "non-independent mode". Unfortunately, I've got year end stuff to do, and a half dozen instructions that need major updates at the moment. If you bump this thread in another month or two, we can revisit this.
Yes!!!! That is exactly what I am looking for and want to do The mode switching is something that I was thinking of but didn't mention. This would be a great mod and I'm happy that you are on board with it! I think that a lot of people would use it if it was available. I will certainly bring it back up in a month or two.....put me on the list for the chip!!
Thanks!!!