Build Your Own Clone Message Board

It is currently Thu Mar 28, 2024 2:08 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Mon Nov 25, 2013 1:36 am 
Offline
User avatar

Joined: Thu Nov 27, 2008 11:38 am
Posts: 4897
Location: Columbia River Gorge
I am going nuts, and I know this is easy. Hopefully, in the future, others can refer to this epic doofus thread and learn from my dilemma.

What the hell is the part number for a 16mm B250K solder lug pot from Mouser?

Thanks!

_________________
Image

Frag Magnet wrote:


BYOC: So easy even a drunk can do it!
:lol:


Last edited by crbmoa on Mon Nov 25, 2013 12:50 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon Nov 25, 2013 2:34 am 
Offline

Joined: Tue Nov 05, 2013 12:41 am
Posts: 372
Location: Melbourne, Australia
crbmoa wrote:


What the hell is the part number for a 16mm B250K solder lug pot from Mouser?

Thanks!


This should be it?

Mouser Part #:
313-1000F-250K
Manufacturer Part #:
RV16AF-10-15R1-B250K
Manufacturer:
Alpha (Taiwan)
Description: Potentiometers Linear B250K Solder Lugs

http://au.mouser.com/ProductDetail/Alph ... 5o8w%3d%3d

_________________
http://www.pedalobsession.net
7 April 2014 - Pop'd boards and new arrivals

PCB suppliers list - http://www.pedalobsession.net/pcb-kits/


Top
 Profile  
 
PostPosted: Mon Nov 25, 2013 12:10 pm 
Offline
User avatar

Joined: Thu Nov 27, 2008 11:38 am
Posts: 4897
Location: Columbia River Gorge
TwistedRider wrote:
crbmoa wrote:


What the hell is the part number for a 16mm B250K solder lug pot from Mouser?

Thanks!


This should be it?

Mouser Part #:
313-1000F-250K
Manufacturer Part #:
RV16AF-10-15R1-B250K
Manufacturer:
Alpha (Taiwan)
Description: Potentiometers Linear B250K Solder Lugs

http://au.mouser.com/ProductDetail/Alph ... 5o8w%3d%3d


That is correct, but the information on the website said the part had a switch. That is of course an error, as it is the 313-1100F-250K that has the switch.

A quick call to Mouser tech support made them aware of the error.

Thanks!

_________________
Image

Frag Magnet wrote:


BYOC: So easy even a drunk can do it!
:lol:


Top
 Profile  
 
PostPosted: Mon Nov 25, 2013 12:21 pm 
Offline
User avatar

Joined: Fri Oct 21, 2011 12:12 pm
Posts: 2888
Location: Delaware
I use smallbear for my pots, they are quite a bit cheaper, especially if you start to get qty. and qty cost is split over and value or taper (C and W tapers not included). If you're already doing a mouser order and just need one pot, then sure, grab it there. But for stocking up in the future, the bear is the way to go.

_________________
If practice makes perfect, and nobody is perfect, then why practice?

It hurts me to say this.. but.. follow me on facebook and.. :( instagram


Top
 Profile  
 
PostPosted: Mon Nov 25, 2013 12:49 pm 
Offline
User avatar

Joined: Thu Nov 27, 2008 11:38 am
Posts: 4897
Location: Columbia River Gorge
spin wrote:
I use smallbear for my pots, they are quite a bit cheaper, especially if you start to get qty. and qty cost is split over and value or taper (C and W tapers not included). If you're already doing a mouser order and just need one pot, then sure, grab it there. But for stocking up in the future, the bear is the way to go.


Totally agree. I NEVER order pots from Mouser.

BUT - Small Bear is a usually a week turn, Mammoth ships slightly quicker, but takes longer to fill the order.

I ordered from Mouser this morning and will have the pots tomorrow.

They are the ONLY place I know of that actually means overnight when I pony up the cash.

If I had a week to play with (READ - if I did not screw up on my earlier orders), I would go with the Bear or the Woolly Beast!

_________________
Image

Frag Magnet wrote:


BYOC: So easy even a drunk can do it!
:lol:


Top
 Profile  
 
PostPosted: Mon Nov 25, 2013 12:56 pm 
Offline
Moderator
User avatar

Joined: Thu Jan 10, 2008 10:14 pm
Posts: 9844
Location: NY, NY
I hear ya. Mouser is the place to go if you need it quick and guaranteed quick!

_________________
duhvoodooman wrote:
My, that IS a big one!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group