Build Your Own Clone Message Board

It is currently Fri Mar 29, 2024 1:41 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 16 posts ] 
Author Message
 Post subject: Ummm that's a lot
PostPosted: Wed Jan 22, 2014 10:26 pm 
Offline

Joined: Tue Nov 05, 2013 12:41 am
Posts: 372
Location: Melbourne, Australia
So this is what 4000 resistors looks like :)

Image

Should get a few builds out of this lot

_________________
http://www.pedalobsession.net
7 April 2014 - Pop'd boards and new arrivals

PCB suppliers list - http://www.pedalobsession.net/pcb-kits/


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Wed Jan 22, 2014 10:31 pm 
Offline
User avatar

Joined: Sun Nov 18, 2012 5:13 pm
Posts: 4776
Location: Soddy Daisy,TN
I don't man, did you count them, looks a bit light to me.

_________________
Pedal building is like the opposite of sex. All the fun stuff happens before you get in the box.


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Wed Jan 22, 2014 10:40 pm 
Offline

Joined: Tue Nov 05, 2013 12:41 am
Posts: 372
Location: Melbourne, Australia
Yep it adds up ok. 50 in a run and have over 90 runs there.

_________________
http://www.pedalobsession.net
7 April 2014 - Pop'd boards and new arrivals

PCB suppliers list - http://www.pedalobsession.net/pcb-kits/


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Wed Jan 22, 2014 10:58 pm 
Offline
User avatar

Joined: Sun Nov 18, 2012 5:13 pm
Posts: 4776
Location: Soddy Daisy,TN
TwistedRider wrote:
Yep it adds up ok. 50 in a run and have over 90 runs there.
touché

_________________
Pedal building is like the opposite of sex. All the fun stuff happens before you get in the box.


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Wed Jan 22, 2014 11:14 pm 
Offline
User avatar

Joined: Fri Oct 21, 2011 12:12 pm
Posts: 2888
Location: Delaware
I'd say you're good for a bit.

_________________
If practice makes perfect, and nobody is perfect, then why practice?

It hurts me to say this.. but.. follow me on facebook and.. :( instagram


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Thu Jan 23, 2014 7:30 am 
Offline

Joined: Sat Nov 17, 2012 12:16 pm
Posts: 160
Location: Reading MA USA
spin wrote:
I'd say you're good for a bit.

If your luck is like mine, I'll bet that your next build will call for 1 resistor value that's not there. :(

_________________
"I have taken more out of alcohol than alcohol has taken out of me."
-- Winston Churchill


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Thu Jan 23, 2014 7:32 am 
Offline

Joined: Tue Nov 05, 2013 12:41 am
Posts: 372
Location: Melbourne, Australia
Yeah I'm certain to need singlet of values I don't have.

Kind of Par for the course.

_________________
http://www.pedalobsession.net
7 April 2014 - Pop'd boards and new arrivals

PCB suppliers list - http://www.pedalobsession.net/pcb-kits/


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Thu Jan 23, 2014 9:27 am 
Offline
User avatar

Joined: Sun Nov 18, 2012 5:13 pm
Posts: 4776
Location: Soddy Daisy,TN
bcalla wrote:
spin wrote:
I'd say you're good for a bit.

If your luck is like mine, I'll bet that your next build will call for 1 resistor value that's not there. :(

True story, just bought 400 1/8 watt resistors and the afterlife compressor called for 10m...not there..... :shock: yaayyy!!!

_________________
Pedal building is like the opposite of sex. All the fun stuff happens before you get in the box.


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Fri Jan 24, 2014 1:40 pm 
Offline
User avatar

Joined: Tue Feb 07, 2012 3:18 pm
Posts: 7321
Location: Nashville, TN
TwistedRider wrote:
So this is what 4000 resistors looks like :)

Image

Should get a few builds out of this lot


I assume they are all 10k? :D

_________________
powerpopguy wrote:
warm places theory sounds plausible. Occasionally, I wake up and think my snake is missing too, but it turns out it's just a chilly morning. :P


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Fri Jan 24, 2014 2:48 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
TNblueshawk wrote:
TwistedRider wrote:
So this is what 4000 resistors looks like :)

Image

Should get a few builds out of this lot


I assume they are all 10k? :D


Teepee Canoo Fest!

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Sat Jan 25, 2014 6:53 am 
Offline

Joined: Tue Nov 05, 2013 12:41 am
Posts: 372
Location: Melbourne, Australia
TNblueshawk wrote:
TwistedRider wrote:
So this is what 4000 resistors looks like :)

Image

Should get a few builds out of this lot


I assume they are all 10k? :D


Haha no.

About 90 values I think.

Away for a few days so not done anything about sorting then yet

_________________
http://www.pedalobsession.net
7 April 2014 - Pop'd boards and new arrivals

PCB suppliers list - http://www.pedalobsession.net/pcb-kits/


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Mon Jan 27, 2014 6:53 pm 
Offline
User avatar

Joined: Sat Sep 10, 2011 5:38 pm
Posts: 1915
Location: Maine
I got 1000 100KΩ's a year or two ago and I still have a crap-ton. You'll be swimming in those for years to come my friend!

_________________
Image


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Mon Jan 27, 2014 9:12 pm 
Offline
User avatar

Joined: Sun Nov 18, 2012 5:13 pm
Posts: 4776
Location: Soddy Daisy,TN
dpalme wrote:
I got 1000 100KΩ's a year or two ago and I still have a crap-ton. You'll be swimming in those for years to come my friend!

Sounds like a challenge to me!

_________________
Pedal building is like the opposite of sex. All the fun stuff happens before you get in the box.


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Tue Jan 28, 2014 1:50 am 
Offline

Joined: Tue Nov 05, 2013 12:41 am
Posts: 372
Location: Melbourne, Australia
Challenge accepted :)

_________________
http://www.pedalobsession.net
7 April 2014 - Pop'd boards and new arrivals

PCB suppliers list - http://www.pedalobsession.net/pcb-kits/


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Tue Jan 28, 2014 4:01 pm 
Offline
Moderator
User avatar

Joined: Mon Feb 04, 2013 8:28 pm
Posts: 1352
Location: Richland, WA.
dpalme wrote:
I got 1000 100KΩ's a year or two ago and I still have a crap-ton. You'll be swimming in those for years to come my friend!



You get 4.5 volts, you get 4.5 volts, everybody gets 4.5 volts!!!

_________________
The tone is in my hands?!
Email: nick@buildyourownclone.com


Top
 Profile  
 
 Post subject: Re: Ummm that's a lot
PostPosted: Wed Jan 29, 2014 5:50 am 
Offline
User avatar

Joined: Sat Sep 10, 2011 5:38 pm
Posts: 1915
Location: Maine
I laughed way too much at that. . .

_________________
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group