Build Your Own Clone Message Board

It is currently Sat May 18, 2024 11:45 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 65 posts ]  Go to page 1, 2, 3  Next
Author Message
PostPosted: Tue Mar 11, 2014 7:59 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
Hi guys,

You can now sign in and enter your quantity for this groupbuy in the spreadsheet found here:

https://docs.google.com/spreadsheet/ccc ... ring#gid=0

Thanks to Scott (sjaustin) for this other cool spreadsheet :)

All the instructions are in the yellow header.

Once you have entered your informations, when invoice is sent your name will be enlightned in RED, once payment is received it will be GREEN.

All payments will need to be received by Sunday 15th, if you sign up... and there's something/whatever happens and that you can't make the payment in time, contact me in PM and i'll work out something with you.

Thanks to everyone participating in this GB and the Bros giving a serious hand to make this happen! lml

Rej

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Last edited by GrindCustoms on Tue May 06, 2014 7:16 pm, edited 6 times in total.

Top
 Profile  
 
PostPosted: Tue Mar 11, 2014 8:17 pm 
Offline
User avatar

Joined: Wed Feb 03, 2010 11:49 pm
Posts: 1075
Is this for the new Belton Brick (Is that out yet?)

_________________
Basic Audio Pedals


Top
 Profile  
 
PostPosted: Tue Mar 11, 2014 8:21 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
Basic Audio wrote:
Is this for the new Belton Brick (Is that out yet?)


Sadly no, it's still not available.... :|

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
PostPosted: Tue Mar 11, 2014 8:36 pm 
Offline
User avatar

Joined: Wed Feb 03, 2010 11:49 pm
Posts: 1075
Ok, thanks. I want to try that one out.

_________________
Basic Audio Pedals


Top
 Profile  
 
PostPosted: Tue Mar 11, 2014 8:41 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
Basic Audio wrote:
Ok, thanks. I want to try that one out.


Me too..and badly! haha

In the course of getting to this groupbuy, i thought the BTDR-3 was stocked at TAD in UK.. ordered 2.. and then got a back ordered email, it was 52$ for 2 modules. :shock: ...asked for refund.... :roll:

There's any sign that it will get in production soon either.

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
PostPosted: Tue Mar 11, 2014 9:12 pm 
Offline
User avatar

Joined: Mon Oct 15, 2012 1:11 pm
Posts: 541
Location: Victoria, B.C.
Rej thanks for doing this! The price works out to be way less expensive! And Scott, thanks for doing another GB spreadsheet!


Top
 Profile  
 
PostPosted: Tue Mar 11, 2014 10:04 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
Ben, i've put you in a pending status, i don't know yet if there's other participant from OzAsia yet...

If there's more we'll figure it out in time.

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
PostPosted: Tue Mar 11, 2014 11:51 pm 
Offline
User avatar

Joined: Sun Oct 12, 2008 5:18 pm
Posts: 3845
Location: Byron Bay, Australia
GrindCustoms wrote:
Ben, i've put you in a pending status, i don't know yet if there's other participant from OzAsia yet...

:shock: Fair enough.
Actually, I've still got a couple of bricks... I was just chipping in to be one of the cool kids.
It's a real good deal (if there's any other Ozzies reading this.)

_________________
"Spud knows tone"

codtone.com


Top
 Profile  
 
PostPosted: Wed Mar 12, 2014 11:04 am 
Offline
User avatar

Joined: Fri Dec 10, 2010 9:01 am
Posts: 1019
Location: Doncaster, S Yorkshire, UK
Can't be arsed waiting for the new brick any longer and I need some 'verb... I'm in :D !

_________________
My Site/Blog: http://www.sj-effects.com/.


Top
 Profile  
 
PostPosted: Wed Mar 12, 2014 2:13 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
raulduke wrote:
Can't be arsed waiting for the new brick any longer and I need some 'verb... I'm in :D !


Thanks Steve and i got this going based on your suggestion.... :lol:

The «new» brick is essentially the same thing... it will not change the wheel, you just change the inner resistance to allow more or less reverb time.... the tone print of the unit remains the same and the inherent modulation still there.... and it looks to be costier... still trying to find the «real» advantages of the new one... and that may be why they're not releasing it.

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
PostPosted: Thu Mar 13, 2014 12:11 am 
Offline
User avatar

Joined: Sat Sep 10, 2011 5:38 pm
Posts: 1915
Location: Maine
Can't wait. Been needing designing a new verb and need a long brick but only have short.

_________________
Image


Top
 Profile  
 
PostPosted: Thu Mar 13, 2014 4:37 am 
Offline
User avatar

Joined: Fri Dec 10, 2010 9:01 am
Posts: 1019
Location: Doncaster, S Yorkshire, UK
GrindCustoms wrote:
raulduke wrote:
Can't be arsed waiting for the new brick any longer and I need some 'verb... I'm in :D !


Thanks Steve and i got this going based on your suggestion.... :lol:


Ha ha I meant the new ones :lol:

But they appear to be fairy dust at the moment. So back to the old and good un's.

I'm not so sure the decay control is that simple on the new ones though. It could be controlling reverb's actual decay/size, rather than feedback/dwell, which is a lot different in terms of tone.

_________________
My Site/Blog: http://www.sj-effects.com/.


Top
 Profile  
 
PostPosted: Fri Mar 14, 2014 5:49 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
2.5 Days left to sign in, don't miss the boat!

If you're email adress is RED and you did'nt received the invoice, let me know.

Rej


raulduke wrote:
GrindCustoms wrote:
raulduke wrote:
Can't be arsed waiting for the new brick any longer and I need some 'verb... I'm in :D !


Thanks Steve and i got this going based on your suggestion.... :lol:


Ha ha I meant the new ones :lol:

But they appear to be fairy dust at the moment. So back to the old and good un's.

I'm not so sure the decay control is that simple on the new ones though. It could be controlling reverb's actual decay/size, rather than feedback/dwell, which is a lot different in terms of tone.


It's the decay/size that it indeed controls... but... even without trying it... i'm almost sure of my statement.

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
PostPosted: Sun Mar 16, 2014 6:07 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
4Hours left, before this is closed.

Some payments are still due.

dogfish
twangzilla
pickdropper
JeremyP

Thanks

Rej

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
PostPosted: Mon Mar 17, 2014 1:13 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
Closed with 83 Bricks total! :D

That's 20 more than last year.

Let's proceed this order now! 8)

Twangzilla, please contact me.

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
PostPosted: Mon Mar 17, 2014 2:01 pm 
Offline
User avatar

Joined: Sat Sep 10, 2011 5:38 pm
Posts: 1915
Location: Maine
Woohoo!

_________________
Image


Top
 Profile  
 
PostPosted: Mon Mar 17, 2014 9:20 pm 
Offline
User avatar

Joined: Sun Nov 18, 2012 5:13 pm
Posts: 4786
Location: Soddy Daisy,TN
What are we looking at, 3 weeks?

_________________
Pedal building is like the opposite of sex. All the fun stuff happens before you get in the box.


Top
 Profile  
 
PostPosted: Tue Mar 18, 2014 1:43 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
jimilee wrote:
What are we looking at, 3 weeks?


If everything goes fine, US orders should start shipping sometime next week, in the other week for CAN.

UK/EUR will get their batch for Distribution to Juansolo when Forrest receive complete order and ship them.

A tracking should be available.

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
PostPosted: Wed Mar 19, 2014 2:33 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
Ok! So i was closing the transaction with the Supplier and they're short on the Long bricks, wich are more than the 3rd of the order.

To secure our quantity on the Small and Medium aswell as the price quote i got, i'm clearing the due for the Short and Medium.

The whole package will be sent once the Long bricks are stocked.

I can't get the order in 2 different shipment, it would bust out the shipping payment you guys did.

Sorry for this delay, when i got in touch with the Supplier i had confirmed minimum quantities with them to keep them on hold for me, seems like i've been shifted.

Hope you guys understand, even if i would like, i simply can't back off at this point.

Thanks

Rej

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
PostPosted: Wed Mar 19, 2014 3:02 pm 
Offline
User avatar

Joined: Tue Feb 21, 2012 1:02 am
Posts: 3225
These things happen, Rej.

Did they estimate when the long bricks will come in? 2 weeks, 2 months or 2 years? :-)


Top
 Profile  
 
PostPosted: Wed Mar 19, 2014 3:04 pm 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
pickdropper wrote:
These things happen, Rej.

Did they estimate when the long bricks will come in? 2 weeks, 2 months or 2 years? :-)


Mid April is the ETA.

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
PostPosted: Wed Mar 19, 2014 4:44 pm 
Offline
User avatar

Joined: Sun Nov 18, 2012 5:13 pm
Posts: 4786
Location: Soddy Daisy,TN
I can put off the reverb, I've only got about 50 other things to build :-) you're good people for doing this Rej

_________________
Pedal building is like the opposite of sex. All the fun stuff happens before you get in the box.


Top
 Profile  
 
PostPosted: Wed Mar 19, 2014 10:01 pm 
Offline
User avatar

Joined: Sat Sep 10, 2011 5:38 pm
Posts: 1915
Location: Maine
Eh, I've waited long. *cough*mammoth*cough*

_________________
Image


Top
 Profile  
 
PostPosted: Thu Mar 20, 2014 6:10 am 
Offline
User avatar

Joined: Tue Feb 21, 2012 1:02 am
Posts: 3225
GrindCustoms wrote:
pickdropper wrote:
These things happen, Rej.

Did they estimate when the long bricks will come in? 2 weeks, 2 months or 2 years? :-)


Mid April is the ETA.


I doubt I'll even notice the difference. Mid April will come fast enough for me.


Top
 Profile  
 
PostPosted: Thu Mar 20, 2014 8:08 am 
Offline
User avatar

Joined: Thu Aug 25, 2011 7:24 pm
Posts: 8970
Location: Rouyn-Noranda, Qc
dpalme wrote:
Eh, I've waited long. *cough*mammoth*cough*


Not dealing with them for this.

_________________
Comfort Player wrote:
After reflowing and several attempts at signal tracing and switch testing I plugged in the power.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 65 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group