need to check if these components are good for a coloursound overdriver (
https://3.bp.blogspot.com/-ACzyUqIgLus/ ... +Rev+2.png) on this schematic. I cant find a transistor to replace the bc184c from my supplier, how much will change if i use the same transistors (bc546c) for all three in the schematic. Other than that just want to make sure im using the right components.
2 BC546C (REPLACEment BC169C)
cant find replacement for bc184c
alpha pot 16mm 10k lin
2 alpha pot 16mm 100k lin
alpha pot 16mm 100k audio
3 panasonic fc 22uf 35v (electrolytic)
shr 10uf/35v (electrolytic)
2 shr 4,7uf/50v (electrolytic)
2 ceramic disc 0,22uf (ceramic)
2 mkt 10nf (film)
greenie 0,1uf (film polyester greenies)
2 4k7 metal film
12k metal film
6k8 metal film
2 150k metal film
100k metal film
1,0m metal film
2 470r metal film
2 1k8 metal film
33k metal film
4k7 metal film
5k6 metal film
39k metal film
1 LED-Bezel 5mm chrome
1 LED 5mm red
1 3PDT footswitch compact
2 6,3mm Mono jack Switchcraft 11
1 Cliff DC power jack 2,1mm isolated inside