OK, now I understand. The diagram that's currently there refers to the trimpot adjustment procedure for the Q2 voltage bias, not the initial installation of the transistors. Below is the diagram that was included in the first set of Mimosa Jr. instructions, and should probably still be there along with the current diagram. This shows the location of the two transistors, which you have already correctly identified:
Attachment:
mimjr_trannies.jpg
_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)
My Website *
My Musical Gear * My DIY Pedals:
Pg.1 -
Pg.2