Build Your Own Clone Message Board

The guitar plays through the pedal. The lights blink and come on as they are supposed to. No effect. What do I need to inspect? The ics? The signal goes to all the corresponding pins on the schematic as far as I have checked. Just wanted a little direction. Thanks.

Let's start here: viewtopic.php?f=20&t=20913

Photos need to be LARGE, well-lit, well-focused shots of BOTH sides of the PCB and all of the jack and switch wiring. You can post them to a publicly accessible hosting site and display or link them here, or post them directly here using the forum's file attachment function (found below the main posting text box). If you use the latter, know that there is a 1 Mb size limit for image files, so it may be necessary to reduce their dimensions or their color depth to get them below that size limit. Any of a number of image editing applications will allow you to do this. I often recommend IrfanView for this purpose, since it is free and very easy to use.

_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)

My Website * My Musical Gear * My DIY Pedals: Pg.1 - Pg.2