Build Your Own Clone Message Board
It is currently Sun Apr 28, 2024 2:16 am

View unanswered posts | View active topics


Board index » Build Your Own Clone » Effects Pedal Technical Support » BBD effects, Delay & Reverb

All times are UTC - 6 hours




Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Previous topic | Next topic 
Author Message
dradlma
PostPosted: Wed Oct 10, 2007 11:32 pm 
Offline

Joined: Wed Oct 10, 2007 11:26 pm
Posts: 1
Any ideas? It appears all my solders are fine between the board and pot. Where should I troubleshoot next?

Everything else sounds great with the pedal. It just won't repeat.

Thanks,
Dave
Top
 Profile  
 
Stephen
 Post subject:
PostPosted: Fri Oct 12, 2007 12:14 am 
Offline
Moderator
User avatar

Joined: Sat Mar 04, 2006 9:15 pm
Posts: 7662
Location: Ohio
Post some close up and in focus photos of both sides of the PCB as well as the wiring to the PCB, pots and jacks.

_________________
"It’s your soldering."
Top
 Profile  
 
byoc
 Post subject:
PostPosted: Fri Oct 12, 2007 11:58 am 
Offline
Site Admin
User avatar

Joined: Sun Jan 22, 2006 1:39 pm
Posts: 5991
Location: Richland, WA
No repeats means there is a cold solder joing on all or one of the B100k repeats pot, the 1uf cap, and the 10k/12k/15k(depending upon which resistor value you chose) that make up the feedback loop. Do you have an "R" and "C" # for those components, Stephen?

_________________
*patience is a virtue*

Please do not PM me. email is prefered. keith@buildyourownclone.com
Top
 Profile  
 
Morgan
 Post subject:
PostPosted: Fri Oct 12, 2007 12:31 pm 
Offline
Moderator
User avatar

Joined: Wed Apr 26, 2006 5:14 pm
Posts: 8659
Location: Truckee, CA
byoc wrote:
No repeats means there is a cold solder joing on all or one of the B100k repeats pot, the 1uf cap, and the 10k/12k/15k(depending upon which resistor value you chose) that make up the feedback loop. Do you have an "R" and "C" # for those components, Stephen?


Repeats pot = VR2
1uf = C15
12k/15k = R20

Stephen's schematic & parts list are posted in a sticky at the top of the delay lounge. :)

_________________
MasterDelayer/Reverbrador/Ampaholic/TopJacker
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » Build Your Own Clone » Effects Pedal Technical Support » BBD effects, Delay & Reverb

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group