Build Your Own Clone Message Board

I'm trying to troubleshoot my Envelope Filter, and am frustrated by the documentation. The schematic does not number the components, and the only pictures supplied with the instructions of the back of the PCB are of a different pedal.

I can't see all the traces on the back of the PCB, because my pots are already soldered in. To make things worse, I used a piece of cardboard as an insulater between the pots and the back of the board, and that covers even more.

I could remove the pots, and follow everything around myself to figure out which component is which, but that sounds like a pain in the rear. Does any better documentation of this circuit exist? The initial crush I had on BYOC is starting to wear off...

viewtopic.php?f=9&t=4508

1st Version




Current Version

_________________
"It’s your soldering."

Stephen beat me to it! nice

_________________

Thanks for reposting these - I figured out later that this information was already available above (duh)