Stephen wrote:
Sorry for the bad news but you’re gonna have to disassemble your pedal and let us take a look at the solder side.
+1. The only thing that you need to un-solder is the connections to the DC jack. Everything else will just lift out of the enclosure once you remove the nuts on the jacks, pots and footswitch.
It may just be the camera angle, but make sure there's no contact between the wiring for lugs 8 and 9 on the footswitch.
Do you have access to a multimeter and know how to use one?
EDIT: Per Morgan's post following, the LED is NECESSARY for this circuit to function! (It also gives you visual indication that you're in bypass or engaged mode with the footswitch, and confirms that power is getting into the circuit.) If you PM me with a mailing address, I'll be happy to pop one in the mail to you.
_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)
My Website *
My Musical Gear * My DIY Pedals:
Pg.1 -
Pg.2