Build Your Own Clone Message Board

Hi! My Brown Face Tremolo build passes a signal cleanly, but when the effect is engaged, the LED isn't turning on and no audio passes through. I know this problem has been seen many times, and the problem is likely with the LFO, but I've tried resoldering every joint, I checked my footswitch pins weren't touching, and I checked my transistor placement. I would appreciate any help. I've attached three images of my board and would be happy to take any others if necessary.
Thank you so much,
Sam

https://imgur.com/a/1dX4ft9

The circuit can't get power without the DC adapter jack installed.

_________________
*patience is a virtue*

Please do not PM me. email is prefered. keith@buildyourownclone.com

It wasn't working (in the same manner) with the DC jack in, so I took it out to see if it was causing the problems. I can re-install it, but it had the same issues prior to its removal.

I re-installed it and realized I had wired the DC jack incorrectly the first time! It's working now, thank you so much.