Build Your Own Clone Message Board

Full disclosure....this is my first pedal and I'm very new at soldering. I'm confused at the resistor layout on the board as some of the labels on the PCB are confusing. I've managed to get all the resistors organized as per the parts checklist and I found this diagram:

http://www.byocelectronics.com/board/vi ... 31&t=39387

Are the labels on this diagram supposed to line up with my parts checklist? In other words, my parts list is this:

1 - 1k
1 - 2k2
1 - 4k7
5 - 10k
1 - 18k
1 - 100k
1 - 330k
1 - 470k
1 - 3M3

Should the following be true?

R1 = 1k
R2 = 2k2
R3 = 4k7
R4 = 10k
R5 = 10k
R6 = 10k
R7 = 10k
R8 = 10k
R9 = 18k
R10 = 100k
R11 = 330k
R12 = 470k
R13 = 3M3

Nevermind....I found this chart that helps me decode:

https://www.hobby-hour.com/electronics/ ... istors.php