Build Your Own Clone Message Board

Hi -

I recently built the wah drop in kit and although everything seems to be operational, it really doesn't sound good (to the point, I put the original crybaby innards back in)

Here is what I have done to troubleshoot:

1. Tried to preset the Q/Gain/Mid/Bass per viewtopic.php?f=33&t=11207. For the most part I came pretty close (+/-1 at the most). I marked the settings on the circuit board.
2. Tried making sure the taper pot was set correctly so I could get enough treble
3. Mucked around with the trimpots to see if I could make happy tones. Nope...
4. Checked to make sure range cap was the stock .01uf cap (103K) and that I didn't stick the .022uf cap in place.
5. Took pictures of the board (removed from the wah).
6. Posted pictures here.

Any ideas? I've built a few BYOC kits and have been very happy with all until this (which is telling me that I'm doing something wrong. I'm just not sure what).

Thanks in advance!

I was having trouble figuring out how to attach images so I just added to imgur

http://imgur.com/a/3px5P

Can you post sharper focused photos? They really need to be crystal clear to be of any use.

_________________
"It’s your soldering."

Sorry about that. I hope this is better.