Build Your Own Clone Message Board

Heres a stripboard (copper strips) layout for Mr. Doug Hammond's Moddified Crybaby Wah Circuit.



This gives you a DPDT toggle switch to change the 'Q' value resistor on the emitter of Q1, and also a rotary switch to change the sweep capacitor. DH has also changed a couple of other values and added an input and output buffer to make the wah fuzz friendly (so you can place the wah in front of a fuzz if you want to and both effects should function as normal).


Please note the black squares = track cuts and each horizontal line a copper strip. Also, that you will need to check the pinout of your jfets as they may need twisting and the legs insulating to match the layout requirements. (Also not sure which lugs I connected to on the pot - so crimp first and test before soldering or you pedal may Haw Haw intead of Wah Wah!)


An album of the project with higher res pics can be found here: http://home-and-garden.webshots.com/alb ... 6431zOfocJ

_________________
To err is human, blaming someone else shows management potential

wrong thread