Build Your Own Clone Message Board • View topic - Marshall 50 watt heater hook up wire gauge

View unanswered posts | View active topics

Board index » Build Your Own Clone » Amplifier Technical Support

All times are UTC - 6 hours

Marshall 50 watt heater hook up wire gauge

Moderators: geekmacdaddy, dcountry13, Non-Reverse, duhvoodooman, Stephen, Morgan, Matt, Big Dan

Page 1 of 1

[ 2 posts ]

Previous topic | Next topic

Author

Message

banjo-guy

Post subject: Marshall 50 watt heater hook up wire gauge

Posted: Wed Jul 08, 2020 8:25 pm

Joined: Wed Jul 08, 2020 8:09 pm
Posts: 27

I'm building the 50 watt Plexi kit.
I'm at the "daisy chain the heater elements" step. I've used the green wire from the power transformer to connect and I'm really struggling to fit those wires in the holes, especially when there are two wires. Can I use the thinner green wire that is included in the kit? What gauge wire should be used to hook up the tube socket heater. What gauge is the green hookup wire included in the kit?

Top

byoc

Post subject: Re: Marshall 50 watt heater hook up wire gauge

Posted: Mon Jul 13, 2020 10:49 am

Site Admin

Joined: Sun Jan 22, 2006 1:39 pm
Posts: 5991
Location: Richland, WA

banjo-guy wrote:

Typically you'll see 18 or 20AWG for heater wire and 20 or 22AWG for the rest of the wires.

_________________
*patience is a virtue*

Please do not PM me. email is prefered. keith@buildyourownclone.com

Top

Page 1 of 1

[ 2 posts ]

Board index » Build Your Own Clone » Amplifier Technical Support

All times are UTC - 6 hours

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: