I'm getting started! First-time builder here so I'l have a lot of questions. Does it matter which end of the standoffs are against the board (as long as the standoff is on the back side of the board)? I'm seeing it both ways in photos of people's builds, and the instructions don't say. Plus, on page 95 of the instructions it says to pass the threaded portion of the standoff through the chassis and use tM3 nuts on the outside of the chassis, but the photo sure looks like the phillips head machine screw that's on the other end of the standoff is on the outside?
Thanks.
_________________ Twisting and tinning is for chumps.
|