Build Your Own Clone Message Board

Finally got my cab finished, speaker mounted, chassis in and fired up. Seems to work just fine on PP, but nothing on SE. And the 6V6 closest to the speaker jack doesn't light up- I assume that's related. All control knobs work.

I can post photos if needed- anything obvious from the description I should look at first?

EDIT- call off the dogs, I think I found it (or at least part of it). With that tube not lighting up I figured the heater wires were the first place to look, and I see that I have the heater wires on terminal 1 of the 6V6 closest to the jack, not on terminal 2 like it should be (and the other 6V6 is). I'll have at it tomorrow with a clearer head).

_________________
Twisting and tinning is for chumps.

I did the exact same thing, on V4. Was too embarrassed to mention it.

On V3 had no weld, just a mechanical connect. The green cloth is more subject to fraying than the others, hiding some of my mistakes.

Glad we saw the light..

That did it! SE & PP now. If it wasn't for the damn Super Bowl I could run it through its paces....

_________________
Twisting and tinning is for chumps.