Build Your Own Clone Message Board

Take a look at the Eminence speakers--they have several with sensitivity ratings over 100 dB. I ran a Cannabis Rex in my modified Blues Junior (recently sold) and really liked the sound of that speaker. Loud, smooth and great top-end definition without sounding harsh or ice-picky.

_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)

My Website * My Musical Gear * My DIY Pedals: Pg.1 - Pg.2

You mean the Tweed Royal cabinet? I don;t think those measurements are out there - you'll need to measure yourself. I would measure from the back of the chassis to the speaker baffle.

_________________
MasterDelayer/Reverbrador/Ampaholic/TopJacker

There is no hard and fast rule of how many inches away from the tubes to be, that I know of. I think that if the speaker magnet is about flush with the end of the chassis, you should be okay. Most guys seem to say look for about an inch clearance if you can get it.

_________________
MasterDelayer/Reverbrador/Ampaholic/TopJacker

I've put a few classic 30's in 5e3's, but that's not the same dimensions as a TR cab. Measurement seem close enough to me, I'd probably go for it. If it were me, I'd buy a used one so I didn't loose much money if it didn't work and I had to flip it.

_________________
MasterDelayer/Reverbrador/Ampaholic/TopJacker