jimilee wrote:
Right off, it sounds like you got a bad jack....
Maybe, but those enclosed jacks usually aren't a problem. I would suspect that when you try to mount the cover plate, it forces the PCB down into the enclosure and causes a signal short to ground. I've had this happen a couple of times when assembling the mini pedals. Here's an easy fix to try: cover the entire back of the PCB with electrical tape and then try mounting it in the enclosure.
_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)
My Website *
My Musical Gear * My DIY Pedals:
Pg.1 -
Pg.2