Build Your Own Clone Message Board

Finally got my pedal built and have an ever so slight high pitched whine, almost like static. Not necessarily a hum, more like a cymbal crash sound...if that makes any sense.

Flipping the switches don't really make a difference.

Thoughts?

Is it there when using only one amp? Both outputs? Is it there with no input?

_________________
MasterDelayer/Reverbrador/Ampaholic/TopJacker

I'd like to be included on this one. My Amp Selector has a strong hiss on output A. Not so much a whine. Only output A. I have attempted all combinations of ground lift switches. Changed the instrument cables. Different amps. All tests lead me back to output A. I have board rev 1.1 It worked OK a couple months ago. I put it in a drawer. Put it back into use recently. And now the hissing problem. Any advice appreciated.

Hi There - if you look at the dates on the posts above, you'll see that this thread was several years old and is inactive. Please start your own thread describing your unique problem and following the steps in this post: http://www.byocelectronics.com/board/viewtopic.php?f=52&t=34439

Thanks!

_________________
MasterDelayer/Reverbrador/Ampaholic/TopJacker