| Build Your Own Clone Message Board http://byocelectronics.com/board/ |
|
| Super 8 no sound output. http://byocelectronics.com/board/viewtopic.php?f=52&t=60054 |
Page 1 of 1 |
| Author: | jashe123 [ Fri Apr 01, 2022 5:12 pm ] |
| Post subject: | Super 8 no sound output. |
Hi all. I finally got around to building my super 8 looper and I received the the rev 1.1 board and the parts for the rev 1.2 board. I’ve already got some parts on the way from byoc but I was impatient and ordered a photo coupler and transistors from Amazon. The transistors fixed the problem of the presets staying on but now I cannot get a signal out of the pedal. Everything works as it should but when I hook up my guitar I get nothing out. Did I order the wrong photo coupler? Anyone have a part number? |
|
| Author: | jashe123 [ Sat Apr 02, 2022 5:13 pm ] |
| Post subject: | Re: Super 8 no sound output. |
Any help here is appreciated. I’m ready to give up and toss it in the trash. Waste of $ |
|
| Author: | duhvoodooman [ Sat Apr 02, 2022 6:37 pm ] |
| Post subject: | Re: Super 8 no sound output. |
Patience, please. The Super 8 is a complicated microprocessor-controlled device and Keith/byoc knows its workings far better than any of the rest of us here. I'm sure he will stop by and weigh in on your problem, though it may not be until Monday. I'm confident he can help you get it running properly, so please hang in there. |
|
| Author: | jashe123 [ Mon Apr 04, 2022 8:20 am ] |
| Post subject: | Re: Super 8 no sound output. |
Thanks. I was definitely feeling defeated during my last post. Lol. I was able to get some sound through it but it’s very noisy. Sounds like when you touch your cable when it’s plugged into the amp. Also getting a lot of clipping noise when I switch from preset to preset. |
|
| Author: | byoc [ Mon Apr 04, 2022 10:26 am ] |
| Post subject: | Re: Super 8 no sound output. |
The photo coupler mutes the circuit for a very brief period while switching so that you don't hear the relays clicking. So maybe the photo coupler you are using is muting your signal. The photocoupler is not an essential part of the circuit, so I'd probably best to remove it for now and then replace it with the part we sent you later. So take out the optocoupler and tell me what your super8 is doing now. |
|
| Author: | jashe123 [ Mon Apr 04, 2022 10:58 am ] |
| Post subject: | Re: Super 8 no sound output. |
I replaced it already with the one you guys sent. I noticed a few of the relays not clicking so I replaced the transistors and got some sound to come through but there is a very obnoxious loud buzzing. |
|
| Author: | byoc [ Mon Apr 04, 2022 11:15 am ] |
| Post subject: | Re: Super 8 no sound output. |
jashe123 wrote: I replaced it already with the one you guys sent. I noticed a few of the relays not clicking so I replaced the transistors and got some sound to come through but there is a very obnoxious loud buzzing. If you remove power, the Super8 will go into bypass. Without power plugged in, do you get bypass (signal just goes straight from the main IN to the main OUT) and does the noise go away? |
|
| Author: | jashe123 [ Mon Apr 04, 2022 9:30 pm ] |
| Post subject: | Re: Super 8 no sound output. |
Still noisy. Gets louder when it’s plugged in. |
|
| Author: | jashe123 [ Wed Apr 06, 2022 10:00 am ] |
| Post subject: | Re: Super 8 no sound output. |
I am getting bypass but it’s still very noisy |
|
| Author: | byoc [ Wed Apr 06, 2022 10:05 am ] |
| Post subject: | Re: Super 8 no sound output. |
jashe123 wrote: I am getting bypass but it’s still very noisy If you're getting noise when there is no power to the unit, then that would imply that you have a grounding issue. Do you have a multimeter and know how to test for continuity? With power off to the unit, and cables plugged into the in and out jacks, test for continuity between the sleeves of the cables. |
|
| Author: | jashe123 [ Wed Apr 06, 2022 12:46 pm ] |
| Post subject: | Re: Super 8 no sound output. |
I am getting.1 at the sleeve and .7 at the tip |
|
| Author: | sjaustin [ Wed Apr 06, 2022 1:10 pm ] |
| Post subject: | Re: Super 8 no sound output. |
jashe123 wrote: I am getting.1 at the sleeve and .7 at the tip You need to do a continuity check, not a voltage check. Here's a video about how to do it: Keith (byoc) suggested plugging cables into the input and output and then checking for continuity at the sleeves of the other end of the cables. |
|
| Author: | jashe123 [ Wed Apr 06, 2022 3:04 pm ] |
| Post subject: | Re: Super 8 no sound output. |
I did. It’s .1 ohms and .7 ohms. |
|
| Author: | byoc [ Wed Apr 06, 2022 4:46 pm ] |
| Post subject: | Re: Super 8 no sound output. |
jashe123 wrote: I did. It’s .1 ohms and .7 ohms. There are a couple things here. First of all, you aren't supposed to measure sleeve to tip. You should be measuring sleeve to sleeve. We want to see if you have continuity between all your ground connections. So first, plug a cable into the input. Then plug another cable into the output. Then test for continuity between the sleeve of one cable and the sleeve of the other cable. You've accidentally exposed another potential problem. If you are indeed correctly measuring between the tip and sleeve, and you are only getting .1 ohms resistance (which is essentially continuity), then you have your signal path shorted to ground somewhere. |
|
| Author: | jashe123 [ Wed Apr 06, 2022 7:00 pm ] |
| Post subject: | Re: Super 8 no sound output. |
I did exactly that. I plugged in my 1/4 cable into the output and the other end of that cable to my amp. I then plugged another 1/4” cable into the input jack. I then measured the ohms between the sleeve of the input cable and the sleeve of the output cable. It read .1 so there is continuity there. I then measured from the tip of the cable in the input jack to the tip of the cable in the output jack. It read .7 ohms. |
|
| Author: | jashe123 [ Wed Apr 06, 2022 7:03 pm ] |
| Post subject: | Re: Super 8 no sound output. |
Just for clarity I’m versed in electronics. I used to build electronic cigarette mods years ago. I’m no expert and this is my first build for this application but I do know the basics. |
|
| Author: | byoc [ Thu Apr 07, 2022 10:53 am ] |
| Post subject: | Re: Super 8 no sound output. |
What is the resistance between the tip and sleeve? Can you please post pics of your build? |
|
| Author: | jashe123 [ Fri Apr 08, 2022 1:23 pm ] |
| Post subject: | Re: Super 8 no sound output. |
Should I check the resistance across the input to output? From tip of the input to the sleeve of the output? |
|
| Author: | jashe123 [ Sat Apr 09, 2022 11:23 am ] |
| Post subject: | Re: Super 8 no sound output. |
It won’t allow me to upload the pics. And honestly I’m tired of the back and forth. At this rate it will take 3 months to figure out why the pedal that came with the wrong parts won’t work. I appreciate all the help but I’ll just buy a looper from ehx or something. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|