Hi all.
Pedal of the day (#057) is a patchbay. It's based on the cinco cinco from the GigRig, But with added functionality.
I use 9 neutrik NRJ6HF and 1 NRJ6HF-1 (both bridged, the latter shares ground with the enclosures, they others don't).
When standard every tip/ring/sleeve is connected to the respective TRS of the opposite switch (and can be used for all kinds of things).
There are 2 3PDT (on/off/on) switches. (should I call these 3P3T since there are 3 positions?).
Is is a VERY tight fit and it took some trial and error.
For know theres only a "send/return" position.
For those who want to know how and why I use this: In send/return mode, the send and return jacks are connected when there's no plug inserted. That way you don't have to use a patchcable from send to return.
I use it like this:gigrig G2 loop x send -> pedal x -> send/return patchbay -> g2 loop x return
It allows me to test different new pedals. If nothing is inserted, I can use my loop as always (without having to attach a patchcable).
Does my english make sense?
Other functionality could be a "amp footswitch split". So TRS in from amp's footswitch and then split to 2 mono (one TS, one RS), so I can put those one different places on my board.
Stay safe and stay at home if you can!
I have barely left my home for 3 weeks now.
Attachment:
057 - Patchbay 5 - 1 - S.JPG [ 352.28 KiB | Viewed 2424 times ]
Attachment:
057 - Patchbay 5 - 3 - S.JPG [ 166.04 KiB | Viewed 2424 times ]
Attachment:
057 - Patchbay 5 - 2 - S.JPG [ 215.1 KiB | Viewed 2424 times ]