Hi folks!
First time poster, long time builder here.
Recently I built the Spring Reverb kit, all was fine and fully functional and I also modded it with the Moody Tone kit (inserted after the Reverb pot), also fully functional.
Then I wanted to try it together with my powersupply´s 18VDC feed to get the "increased headroom" stated in the description and after that I get no wet sound. The dry sound still passes when the pedal is engaged, and I also get a spring reverb "swishy" tail when I power the pedal up in the "engaged mode".
I´ve so far redone all the solder joints and I´ve measured that I still have +5V feeding the reverb circuit.
Has anybody else had this problem and what could a possible solution be? I´ve removed the tone pot mod, but the problem still remains so the error must be on the "main" board.
Best Regards Fredrik
edit: pictures can be seen here:
https://www.dropbox.com/sh/o3aukvgr4k54 ... Sqswa?dl=0