Build Your Own Clone Message Board

It is currently Sat Sep 19, 2020 2:20 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Wed Feb 19, 2020 8:59 am 
Offline

Joined: Wed Feb 12, 2020 10:24 am
Posts: 1
good morning, gents.

so i am trying to set up my Brown Face trem, and it seems that no matter how i set the interior trimpots, there is almost zero depth to be had at anything less than a 12:00 setting on the exterior depth knob. is this the idea, or am i missing something? i get that it gives me a level of "phasing", but i think i would prefer more control over the shallower settings.

thanks!
david


Top
 Profile  
 
PostPosted: Wed Feb 19, 2020 11:09 am 
Offline
Moderator
User avatar

Joined: Tue Jan 02, 2007 1:24 pm
Posts: 13651
Location: Albany, NY
Did you set the trimpots using the method described in the instructions? From page 12:

"When you are done with your build, you will need to adjust the trimpots before your build will work properly.

You will first want to set the LEVEL trimpot so you can hear the signal before setting the DEPTH SYMMETRY trimpot. This is your overall output control. Without setting it, you won’t be able to set the DEPTH SYMMETRY.

The Internal DEPTH SYMMETRY trimpot adjusts the volume when the external DEPTH knob is full-turn counter clockwise. Use the DEPTH SYMMETRY trimpot to adjust so that you have a smooth volume transition between full turn clockwise and counter clockwise on the external DEPTH knob."


The first part is easy--just set the LEVEL trimpot at its midpoint. This will give you enough output volume to proceed. You can come back to this trimpot after the second part.

The DEPTH SYMMETRY trimpot setting is critical to getting an audible tremolo effect at lower depth settings. Ideally, you want to get the same output from the pedal with the DEPTH knob all the way over to each of its extremes. This is a little difficult to judge because with the DEPTH control full-on, the tremolo effect makes it tricky to determine what the maximum volume really is (unless you're using an oscilloscope). The trimpot setting on my own Harmonic Trem pedal is at about 10:30 (with the midpoint being equal to 12 o'clock), but you may find that you need/want more or less on your pedal.

You can then go back to the LEVEL trimpot and tweak that for unity volume. On mine, that setting is only very slightly past 12:00 in the CW direction. I've noticed that if you dial that up too high, you'll get an audible "beat" signal from the LFO coming through the output.

Using this trimpot adjustment method and with these settings, I get an audible tremolo output down to about 10 o'clock on the DEPTH control.

Hope that's helpful....

_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)

My Website * My Musical Gear * My DIY Pedals: Pg.1 - Pg.2


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group