Build Your Own Clone Message Board

It is currently Fri Dec 13, 2024 6:14 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed May 29, 2024 8:05 pm 
Offline

Joined: Wed Jan 29, 2014 12:52 pm
Posts: 21
Location: Houston, TX
I have an original Analog Vibrato PCB (2006 Build Doc) and I am trying to source the stereo jacks that work with this board. I realize they are Neutrik but trying to make sure I get the right ones since I see there are a few options.

Any help would be greatly appreciated

Thanks!


Top
 Profile  
 
PostPosted: Thu May 30, 2024 10:39 am 
Offline
Site Admin
User avatar

Joined: Sun Jan 22, 2006 1:39 pm
Posts: 6045
Location: Richland, WA
They don't need to Neutrik. Any "standard" stereo switching 1/4" (6.35mm) PC mounted jack will work. I think you will see most of these types of jacks referred to as "Marshall" jacks as they are the type used in Marshall-style amps. The pin spacing should be the same across all brands. Where you will encounter a difference is in the bushing/nut. Marshall style tend to have a nut that threads on the inside of the bushing, whereas the Neutrik thread on the outside. Doesn't make a difference. It's just something to consider when drilling your enclosure.

_________________
*patience is a virtue*

Please do not PM me. email is prefered. keith@buildyourownclone.com


Top
 Profile  
 
PostPosted: Thu May 30, 2024 8:12 pm 
Offline

Joined: Wed Jan 29, 2014 12:52 pm
Posts: 21
Location: Houston, TX
byoc wrote:
They don't need to Neutrik. Any "standard" stereo switching 1/4" (6.35mm) PC mounted jack will work. I think you will see most of these types of jacks referred to as "Marshall" jacks as they are the type used in Marshall-style amps. The pin spacing should be the same across all brands. Where you will encounter a difference is in the bushing/nut. Marshall style tend to have a nut that threads on the inside of the bushing, whereas the Neutrik thread on the outside. Doesn't make a difference. It's just something to consider when drilling your enclosure.


Thanks for the info

Maybe I was just overthinking it. I went to Smallbear to order some and saw they had had a few with different suffixes and I starting questioning it.

https://smallbear-electronics.mybigcomm ... -nmj6hcd2/

I assume these are just the standard normalled ones......?

I dont plan on using the battery connection but dont have an issue with getting extra support with the 6 lugs for stereo ones.


Top
 Profile  
 
PostPosted: Fri May 31, 2024 10:40 am 
Offline
Site Admin
User avatar

Joined: Sun Jan 22, 2006 1:39 pm
Posts: 6045
Location: Richland, WA
Yep. That jack would work

_________________
*patience is a virtue*

Please do not PM me. email is prefered. keith@buildyourownclone.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group