http://byocelectronics.com/dryblendinstructions.pdfOr study the dry blend add-on circuit for the Crown Jewel. In theory, this can be added to any circuit that has an input buffer, which the TS808 circuit does. You'd connect A to the emitter of the input buffer. Then cut the trace at the output of the distortion op amp. Connect B to the incoming side of the trace and C to the outgoing side.
Actually, instead of cutting the trace just pull the 1K resistor between the distortion op amp and the tone control op amp. Connect B to the distortion side. Connect C to the tone control side.
_________________
*patience is a virtue*
Please do not PM me. email is prefered.
keith@buildyourownclone.com